Alarms
Alarms watch a reading against a limit, with a delay so a spike does not raise one and a deadband so a reading hovering at the limit does not raise one every minute.
Set up an alarm
On the site's Alarms tab, under Alarm settings, choose New alarm:
| Field | What it does |
|---|---|
| Device and Reading | The reading to watch. |
| When it is | Very high, High, Low or Very low: which side of the limit raises the alarm. |
| Limit | The value that raises it. |
| Delay, seconds | How long the reading must stay past the limit first. |
| Deadband | How far back past the limit the reading must come before the alarm clears. |
| Priority | P1 (most urgent) to P4. Decides the order and how people are told. |
| What to say | Optional message, for example Tank T-01 nearly empty. |
An alarm is raised when the reading passes the limit for longer than the delay, and cleared once the reading is back past the deadband.
Work an alarm
Active alarms lists what is standing now, most urgent first. Each alarm can be:
- Acknowledged: someone has seen it and is dealing with it. It stays listed until the reading is back to normal.
- Shelved for 30 minutes, 1 hour, 4 hours or 8 hours, with a reason, for example while a sensor is replaced. A shelved alarm is hidden from the active list for that time but still recorded, and the journal keeps the reason.
Site alarms also appear in Alerts with every other problem on your account.
Who is told
| Priority | How the site owner is told |
|---|---|
| P1 | Email, and a text message to the account's verified phone numbers. If nobody acknowledges it within 10 minutes, a phone call. |
| P2 | |
| P3 and P4 | Shown on the site and in Alerts |
Texts and calls go only to phone numbers verified on your account, where calls and texts are switched on for it, and are billed as Calls and Text messages. See Billing.
Alarm health
Alarm health, last 24 hours shows how many alarms each priority raised. An alarm that is raised again and again usually needs a longer delay or a wider deadband, not more attention.
Something unclear or out of date on this page? Tell support.
