Process diagrams
Draw the site the way operators think about it, with tanks, pumps, valves and pipes, and watch it live: values, flow, alarms and controls on one picture.
Start a diagram
On the site's Diagrams tab, choose Draft from devices to start from a layout made from the site's devices and readings, or Blank diagram to draw from nothing. A site can have several diagrams, such as an overview and one per building. Only the owner of a site can edit its diagrams; everyone who can see the site can view them.
Draw it
- 1
Place symbols
Pick a symbol on the left and place it. There are 38 equipment symbols. Move and resize them on the canvas; undo and redo work while you draw.
- 2
Bind each symbol to a reading
Select a symbol and choose the reading it shows. A symbol that is not bound says Not bound. A tank also takes the readings at which it is Empty at and Full at.
- 3
Connect with pipes and cables
Draw a Connection between symbols. Choose Cable for electrical lines. A pipe shows flow when a reading says it Flows when, or otherwise when the equipment it comes from is running.
- 4
Add controls and links
A button sends a value when pressed (Value sent when pressed); a setpoint asks for the new value. A link symbol Opens diagram, so an overview can lead to the detail of each area.
- 5
Add the site's own drawing
Put a plan, a schematic or a photo of the site behind the symbols, and set its Drawing opacity so the symbols stay readable. Remove drawing takes it away.
- 6
Save
If someone else saved the same diagram while you were editing, you are told before anything is overwritten.
Diagrams have two looks, for a control room and for an office screen. Use Preview look to see the other one before you save.
Watch it live
Open a diagram to watch the site: values update as readings arrive, pipes show flow, and equipment in alarm is marked with its alarm's priority. Zoom in on a large site, and use TV mode for a wall display. Controls on the diagram follow the control's protection, so a protected pump asks for the same confirmation or approval as anywhere else.
On dashboards and site screens
- Add the Process diagram widget to any dashboard to show a diagram beside other widgets.
- A site gateway shows the site's diagrams on its own screen on the site's network, and keeps them live when the internet is down.
Something unclear or out of date on this page? Tell support.
